One platforms: SALPURI

Title: One platforms: SALPURI Designer: Daegeon Lee (이대건), Jihong Lee, Jiyeong Oh Status: Proposal Award: Selected work, The 32nd Space Prize for International Students of Architectural Design Organizer: The Space Group Year: 2014 Prologue 'Peace' doesn't mean simply absence of dispute or reunification. Inspite of division, it can be 'peace in conflict' to experient common space and to arouse co..

2022.08.20

Dichroic cube, 2020

Title: Dichroic cube Lead Designer: Daegeon Lee (이대건) Design team: Sangmin Woo, Sujin Lee, Junghoon Lee, Taewon Koh, Wonju Lee, Yewon Seo, Sehyun Yoon, Eunji Park, Yeonggyeong Kim Size: 1.5x1.5x2.2m Material: Acrylic sheet, Mirror film, Dichroic film, LED strip, Wago, Cable, Arduino mega, Light controller Year: 2020 It was a part of the educational project. As I had many experiences with install..

2022.08.17

Silk cloud, 2019

Title: Silk cloud Project Team: Lawrence Kim, Sujin Lee, Daegeon Lee, Hyeonseok Park, Gayeon Kim, Jeongwoo Son, Eunbi Ko, Naeun Kim, Hawon Kang, Sanga Im, Hyeyeon Kim, Nahyeon Ju, Sangyun Lee, Yajun Wen, Minkee Kim, Chanheum Jeong Material: Organza, Wire, C-clamp It is a project of an installation design course at the department of architecture, Pusan National University. It was the first time t..

2022.08.16

HOPE space, 2019

Designer: Daegoen Lee (이대건) & Hyunseok Park (박현석) Design team: Sangmin Woo, Yuanzhao Liu, Seyeon Kim, Yedam Yoon, Sooyon Kim Title: HOPE space Material: Tyvek, LED strip, Arduino mega, Motion sensor, MOSFET, 2k power supply Year: 2019 It is an installation project on the ceiling of BAFxHUG exhibition room in the BAF 2019. To light up the whole LED strips in each unit and control its brightness, ..

2022.08.16

Comfort zone, 2019

Designer: Daegeon Lee (이대건) & Junseok Park (박준석) Title: Comfort zone Material: Tyvek, LED strip, Arduino Uno, Distance sensor, Batteries Size: 5.5x12.8x0.9m Year: 2017 It is a team project with my friend. We were seeking to build a light and heartwarming form which can create a personal zone in the outdoor environment. The material of the installation, Tyvek, my favorite, was chosen because it c..

2022.08.16

Fragmented spaces: lights in the boxes, 2018

Title: Fragmented spaces: lights in the boxes Design team: prof. Lawrence Kim, Daegeon Lee (이대건), Donghoon Kim, Jaewoong Yoon, Sangwoo Jeon, Hyeonseok Park, Sooyon Kim, Daegyung Kim, Minhye Choi, Chanhyo Jung, Taewon Um Material: White foam board, Acrylic sheet, Mirror film, Half-mirror film, Square bar with white paint finish Size: 2x3x2m Year: 2018 It is a project of an installation design cou..

2022.08.16

KALEIDOSCOMB, 2017

Designer: Daegoen Lee (이대건) & Simona Ma Title: KALEIDOSCOMB: KALEIDOSCOPE + HONEYCOMB Status: Proposal Material: Tyvek, mirror, LED strip curtain, steel mesh, steel components Size: 5.5x12.8x0.9m Year: 2017 Consumers produce newness through consumption. Newness turns into valuable newness through consumption. So the shopping mall should always be new, even actually it is not much different from ..

2022.08.16

Layers of flat nest, 2015

Title: Layers of flat nest Material: Museum board (Laser cut), Fishline, Square bar with white paint finish Size: 2x3x2m Year: 2015 It is a project of an installation design course at the department of architecture, graduate school, Pusan National University. I took part in the course, and it was my first experience with the installation design process. The nature of paper-like material minimize..

2022.08.16

M tower vase

Creator: Daegeon Lee (이대건) & Pottery studio Clayson (클레이손) Title: M tower vase Material: Porcelain Size: 5.5x5.5x20cm Year: 2021 The shape of architecture transformed into a vase. The design motif of the M tower (tentative) was a vase, so there is no reason not to try to make vases with it. Luckily there was a pottery workshop just nearby my university. So I took a 3d printed model to a pottery ..

2022.08.16

Virtual pottery, 2020

Designer: Daegeon Lee (이대건) Title: Virtual pottery Material: White PLA, 3D print(FFF) Size: 10.5x10x10cm Year: 2020 The image above shows just printed copy of a virtual pottery. It took more than 4 hours to print. The translucent part is made of soluble material which made possible to print overhang part of the pottery. Thanks to the development of the virtual reality technologies, I could creat..

2022.08.16

Light-frame Wooden House Model Kit, 2020

Designer: Daegeon Lee (이대건) Title: Light-frame Wooden House Model Kit Material: Aircraft plywood, Acrylic sheet, Laser cut, Glue Size: 25.5x14.7x16.5cm Year: 2020 It was developed for educational events. Students can understand the structure of a light-frame house while they are making their own ones. In original design (in 2019), the size of model and the number of components were bigger than t..

2022.08.16

Cat pen rest, 2019

Designer: Daegeon Lee (이대건) Title: Cat pen rest Material: Technical wood, Birch plywood, Oil Size: 11.9x9x7.8cm Year: 2019 Sketches were traced to a digital model. As it was just a small object, 1 to 1 scale sketches were drawn.

2022.08.15